Rick's b.log - 2014/06/08
You are 3.145.93.227, pleased to meet you!
|
Rick's b.log - 2014/06/08 |
| It is the 21st of November 2024 You are 3.145.93.227, pleased to meet you! |
|
mailto: blog -at- heyrick -dot- eu
That's not how to mow.
The little tractor made fairly light work of it, getting it done in maybe half an hour. And since the tractor was small, it could squeeze into all sorts of tight spaces and turn in places that defy belief.
Seriously - how long would this have taken using the petrol mower? Days? Weeks? I'm thinking maybe two weeks (every day, not going to work but mowing instead).
Thanks Ph.!
(oh, and Mom - I want one of those for my birthday!)
The imager is a 1/3" Sony CCD with 752×582 pixels, claiming around 520 TV lines resolution (a normal CCD camera manages around 470ish). Output is composite video, with colour imaging that works down to 0.3Lux (with an F1.2 lens), however the camera can switch to a more sensitive monochrome mode and apply some push processing to apparently (so the docs claim) work down to 0.002Lux (F1.2). How this fares in reality is something I'll need to see. The camera was produced in 2005.
The camera can accept C and CS mount lenses, which can either control themselves or have the iris controlled by the camera. My camera is fitted with a CS lens that is driven by the camera.
Here it is, hooked to that little LCD TV that I picked up a couple of weeks ago. The iPad didn't much like taking photos of this, so I apologise for the poor quality of the photos. It was a lot simpler/quicker than hooking up the USB video frame grabber.
You can see a caption on-screen "Ricks Window". The camera contains a 16 bit CPU/DSP combo (the WinnerIII) that processes the image, reduces noise, and can provide an on-screen menu. Features, asides from full control of brightness, white balance, iris, etc are a motion detection that will flash up a message if motion is detected. My camera flashed up the notification when the sun came out. There may be a sensitivity option that I have not yet discovered. You can set up to four rectangular zones to be scanned for motion
Because of increasing concerns over privacy, the camera has a way to be able to mask out up to four rectangular zones of the image. In the example below, the garden gate is masked out. The masking can be set to any grey level from white to black.
As I write this, it is approaching twilight. Both the CCD camera and my iPad produce good images looking out of my window. The iPad provides a better picture at the moment (but we're comparing a TV resolution fixed-purpose camera with a 5mpx multipurpose tablet). The real test will be when the light levels drop below what the iPad is capable of compensating for. At this exact moment in time, the iPad's camera is starting to get a bit grainy, all the more evident if you 'zoom' in halfway (digital zoom). The security camera looks sort of like it looked earlier, though as the light level drops, I can see there are seven blown pixels (that show up as white dots). Not so important in a security camera, but if I should ever try to hook this to my telescope or some idea of that nature, I'll need to make up a mask to allow those pixels to be taken out of the image.
Okay, it is now twenty to eleven. On the left is what the security camera sees, and on the right is what the iPad can see:
But, here comes the astonishing thing. It is now ten past eleven at night. Looking out of my window, I can see complete darkness save for a partially obscured half moon and the various solar lamps. I might see if I was to go into a dark place for a while to let my eyes adjust. I just went out to close my shutters and I could only just make out the garden gate if I tried really hard.
Incidentally, this is what the on screen menu looks like (the ghosting in the picture is because my video connection is some bits of wire I had lying around!):
Because it's me... Inside the camera are three boards. The middle board is mostly bare (and the space inside the box, mostly empty). This can be used to convert down 24VAC to 12VDC, it can also be used to convert 230VAC to 12VDC. Depends on the model. Since mine runs directly off 12V, there's nothing here.
On the other side, the board at the front holds all the smarts. The big chip is the DSP. I would guess the one beside with the stuff stamped on it is either Flash or SRAM. I have not been able to find a datasheet for the (proprietary) WIII chip. The screw mounts in the middle of the board hold the CCD imager, which is mounted on the reverse.
Ooo-eck!
Instead of the usual little brown wall lizards, I came across this monster. Proof of Global Warming? ☺
Mowing - how it should be done
With many thanks to Ph., our grass has been tamed. Of course, we don't make much headway using a little petrol mower that sort-of cuts strips about a foot wide (actually it does about 2ft wide, but you need to half-pass on the way back so really you are only gaining a foot each pass).
This is how to mow.
Another Sunday, another vide grenier
Today's acquisition, a Samsung SDC-415PD security camera, for a mere €3. I almost didn't buy it, the man said it worked with SÉCAM, but on consideration I figured about zero foreign equipment understands SÉCAM, so the worst that will happen will be that it's an NTSC model.
It wasn't. The P in the model number means PAL, the D means it runs off 12V DC.
The wide/tele and the focus are manual. The camera is designed to be mounted, set up, then left alone.
A typical way of doing this is to run the camera in complete darkness (all pixels should be black). Several screenshots are taken, and the pixels that are not black are averaged. This is then converted into a mask to be applied to images taken with the camera. Actually, some modern cameras are able to set themselves up to do this if you start them up with a lens cap fitted.
It possibly isn't a help that it appears as if the iris mechanism powers up with the iris fully open. That's a bit duh-worthy if you ask me!
The camera saw it:
You can see that the processing has emphasised numerous defective pixels. This is to be expected, especially when we're looking at a camera that can see when humans struggle. I'm sure anybody who has tried to take pictures with a mobile phone or tablet will know that the effectiveness of most cameras drops out well below the threshold of human sight. Indeed, you can pretty much expect a domestic camera to fail somewhere between twilight and dusk - a situation not helped by most crappy LED flashes that overexpose if you use them close, but aren't strong enough to properly illuminate if you use them further away. Not to mention some cast a disgusting green hue that the software in the camera unit doesn't even bother to try to compensate for (hint - if yours does this, set the white balance to fluorescent mode).
The board at the back handles the buttons and the video output. The flying lead goes to the iris socket.
No comments yet...
| © 2014 Rick Murray |
This web page is licenced for your personal, private, non-commercial use only. No automated processing by advertising systems is permitted. RIPA notice: No consent is given for interception of page transmission. |