Rick's b.log - entry 2012/03/25

I'm not dead!

In some senses, RISC OS is a little backward. There are some things that you think I can't believe this!. To give an idea, the command *Alphabet allows you to change the current alphabet. In other words, the interpretation of the characters in the range 128-255. For example, this is Latin1 (based on ISO 8859/1), broadly similar to Windows CP-1252:

My personal belief is that RISC OS with the functions currently present in RISC OS 5, could evolve into a system capable of running both UTF-8 and Latin1 side by side, application by application. The current firmware has a lot of the stuff necessary, it just needs to be tied together. Thus, applications that know of the extensions can use UTF-8, and older code (of which there is a lot) will fall back to Latin1. Some on newsgroups have suggested RISC OS make the transition to UTF-8 and be done with it. This would, however, mean anything not modified that uses high-bit-ASCII will turn out wrong. Given the fuss still happening for all-important legacy programs that aren't 32 bit safe (and probably never will be), you'd have thought some attention would be paid to not slamming the door on yet another load of software. Especially since UTF-8 and Latin1 can use the same interfaces - it isn't like the ANSI/Unicode setup in Windows there Unicode uses double-byte strings, thus has all API calls in duplicate!

That said, it is nice to be back coding on RISC OS, especially ARM code!

Vide grenier

Just as we were leaving, there was a young girl (about 10?) who sneezed. I mean an epic sneeze, she nearly fell over. Grabbing her brother's arm (he looked 12ish), she said a little too loudly "je fait pipi!". Showing lots of brotherly love, his reply was "pffft! tant pis!" as her took her hand and dragged her off to look at stuff. Yay for the insensitive wally!

• Talking of insensitive wallies, what's with certain people in Toulouse holding marches etc in honour of the guy that was killed in a gunfight with police? Let's see, he killed three soldiers and calmly shot a man and some children at a hebrew school - yet this is something to honour? You're honouring a two-bit psycho terrorist? Seriously?

I picked up a Sony Mavica MVP-FD91 digital camera for five euros! Running at a massive 0.8 megapixels and writing to floppy disc (!!!), it was seriously old tech, yet for a mere fiver, I thought it would be worth a gamble to see if I could find something to do decent close-ups for my blog. I have been using both standard digital camera and/or mobile phone, and then cropping, but really, nothing quite does the job.

Now, if I need a specific photo for my blog, it'll be a lot simpler to do. The photo on the right is of the little activation switch inside my bluetooth headset. I dropped that when putting it all back together, and it took forever to find!

It is odd using floppies again. The camera is quite quick at writing, though the images are 80-200KiB, images a little smaller than the ones we'd be used to from five megapixel cameras on phones. Armed with both automatic and programmable white balance, the colour reproduction is really rather nice. Here is an example taken looking towards the sun just after sunset. Normal digital camera results are... poor. Washed out colours, focus problems, and the like.
The Mavica, on the other hand, delivers. Sadly, very sadly, a mere 1024×768 for this would be very nice at today's resolutions. That said, you can certainly see the differences between mass market lenses and imagers as compared with something that was intended to be a little better than that.

My uncle

How NOT to run a mail order company?

M&S, on the other hand...
I ordered two sandwich (cake) tins, a yorkshire pudding mould, an ergonomic spatula, and an acrylic pasta bowl. Nothing complicated. I placed my order on the 19th of March (Monday). It wasn't until Friday that I was informed that my order would be modified due to not having a spatula - and between times there was no response at all. My order was sent on the 24th (Saturday). There is a link to the M&S website for order information. Following this link shows you this:

Once you have logged in, by order number and email address, you can obtain a link to their carrier to track shipment. Keeping up with the tradition of being ever so useful, following my shipment results in...:

I am hoping that it will show up soon, and that it is just an anomaly due to the parcel being dispatched from the UK. Either way, there's a little bit of scope for improvement here, especially when it comes to a problem with the order.
That said, it is good to see M&S looking to get back into the French market...

Your comments:

Please note that while I check this page every so often, I am not able to control what users write; therefore I disclaim all liability for unpleasant and/or infringing and/or defamatory material. Undesired content will be removed as soon as it is noticed. By leaving a comment, you agree not to post material that is illegal or in bad taste, and you should be aware that the time and your IP address are both recorded, should it be necessary to find out who you are. Oh, and don't bother trying to inline HTML. I'm not that stupid! ☺ ADDING COMMENTS DOES NOT WORK IF READING TRANSLATED VERSIONS.
 
You can now follow comment additions with the comment RSS feed. This is distinct from the b.log RSS feed, so you can subscribe to one or both as you wish.

Rick, 27th March 2012, 21:13

The tracking now works, I guess now that the parcel is on this side of the channel. Hmmm... Given it has been assigned a tracking number, wouldn't "United Kingdom" have been better than "Unknown parcel number"?

Add a comment (v0.11) [help?] . . . try the comment feed!
		Your name
		Your email	(optional)
		Validation	Are you real? Please type 07897 backwards.
		Your comment