Rick's b.log - entry 2017/08/17

Pi 2 issues

TemplEd

After a bit of poking around, I discovered the following:

   LDMIA  R13!,{R0-R2,R13,PC}

Now unfortunately I'm going to have to get geeky to explain what's wrong here. I've already said R13 is special, it's a stack pointer. If you are quick on the uptake you might wonder why the instruction mentions R13 twice. That part is okay, we're loading a replacement stack pointer from the memory pointed to by the old. This is okay, every single application has its own stack, and applications are free to muck around with their own stack as they wish. It is, actually, a naff but acceptable way of 'resetting' the stack at the end of a complex function. Because as you might have guessed, for everything put onto the stack, there must be a corresponding retrieval of that information. If one single item of data is missed, everythin gels ei nth estac kwil lb eoff ,whic hwil lconfus eeverything, as that sentence demonstrated.

No, the problem is because the instruction also specifies writeback (the '!'). Now writeback is a really useful thing. You see, if you write five registers to the stack, you - as a programmer - don't want to have to think that that's five times four bytes, then take R13 and subtract that. Why? It's the twenty-first century. Tell the processor to work it out for itself and push the updated address back into R13.
So you don't have to worry about what R13 is, you let the processor figure it out.

And here we have an epic logic problem. You have asked the processor to load R13 from memory, while at the same time asking it to write back the updated value of the original R13. Well What do you want? The new one or the updated old one? The ARMv7 specification aborts such instructions as being gibberish. Frankly I'm surprised that such code ever worked correctly, as the behaviour of this was "undefined" so one processor (say, the OMAP) could choose to write the loaded R13, while another (say, Pi1) could choose to write the updated old R13. Remember, R13 is the stack pointer. It's things like this that cause all sorts of obscure bugs.

I patched my MenuUtils module (it's a thing within TemplEd). You can download the patched module, copy the module from the archive into !TemplEd.

Alternatively, there is a slightly later version of the module within WimpWorks. Download the demo and rummage around inside, you'll find it...

Zap

Zap worked on the Pi 2.
But the extension module that colourises C and assembler source code did not.

I write all of my code on RISC OS using Zap. I have, for something ridiculous like a quarter century. And while StrongEd is good (<cough>and still supported</cough>), I'm one of the Zap faithful. And for what it is worth, I've not seen an editor on the PC that comes close to what either of these make easy...

Similar to the above problem, the faulty instruction was quickly identified as:

   STR   R10,[R10,#-4]!

This was not an easier fix. I had to unpack the ZapMJE source from the mess that GitHub's CVS made of it, to find that objasm is quite happy to recognise UAL (modern ARM) instructions in non-UAL (legacy ARM) code, plus will not fault attempts to set a macro to the same name as an instruction... I caught the "SEV" macro because I thought that was an instruction, but I wasn't aware that PUSH was a UAL instruction, I thought it was a Thumb thing. Many thanks to Jeffrey Lee for pointing this out. Thanks also to Fred Graute for the help with StrongEd. Yup, I used StrongEd to fix Zap! ☺

So if your Zap crashes on the Pi 2 (or other ARMv7+) when you try to load some C or assembler source code, you will need my ZapMJE update. This goes inside !Zap.Modules.!ZapMJE.

I think I ought to put together a distribution of the latest Zap, as the current situation is a god-awful mess of "download this, then add this patch, then add this patch...".

DigitalCD

Nothing obvious stands out in a disassembly of DiskSample (fetches the stream), and the only instruction that looks suspicious in AudioMPEG (plays the MP3) is STREQ a1,[a1],#-0 at +&2D8, but that instruction is also &04000000 so it's quite likely that it is data. Certainly, there's nothing that looks able to reach that instruction legitimately. But these are just guesses.

I have not, as yet, tested playing locally held MP3s to see if that makes any difference, or playing with Interrupts not enabled...

How did I track down these errors?

You may get an error with an "Undefined instruction at ...something..." or a nicer looking error with a "Describe" button. If possible (not with TemplEd, but yes with Zap) keep the program running. Use "Continue" and not "Describe" or "Quit".

As soon as an important error occurs, the Debugger has a snapshot of the system's registers at that point.So open a command window and type *ShowRegs to see the registers. These may or may not be useful later (for example, if an instruction is trying to load from a weird address):

Now call up the faulty instruction. Enter *MemoryI PC-8 to see two instructions - one of which will be faulty. Which it is depends upon how the instruction failed. A normal failure to read/write memory will be the upper instruction, however in this case a failed instruction decode will be the lower instruction. Why it is like this is because of how the pipeline works. At any rate, the problem ought to be fairly self-evident, and if you look at the comments on the right, you will see the debugger has even pointed this out with the comment ; *** Rd=Rn.

Your comments:

Please note that while I check this page every so often, I am not able to control what users write; therefore I disclaim all liability for unpleasant and/or infringing and/or defamatory material. Undesired content will be removed as soon as it is noticed. By leaving a comment, you agree not to post material that is illegal or in bad taste, and you should be aware that the time and your IP address are both recorded, should it be necessary to find out who you are. Oh, and don't bother trying to inline HTML. I'm not that stupid! ☺ ADDING COMMENTS DOES NOT WORK IF READING TRANSLATED VERSIONS.
 
You can now follow comment additions with the comment RSS feed. This is distinct from the b.log RSS feed, so you can subscribe to one or both as you wish.

Jeffrey Doggett, 18th August 2017, 08:54

How do you delete comments that clearly show that you're an idiot?

Rob, 18th August 2017, 19:22

Jeffrey: You email Rick ... :-)

Bernard, 18th August 2017, 21:00

StrongED appears to notice the danger with the LDMIA instruction because, in Dump mode, it comments it with with "; *** Rn in". Is this better than Zap?

Rick, 18th August 2017, 21:30

Bernard:    Both Zap and StrongEd say "; *** Rn in list" because that is what the Debugger module says.    Jeffrey:    When I next switch my PC on (need WinSCP to access my site), I'll remove the first two comments [DONE!].    Rob:    Emailing helps, but I should receive an email every time a comment is added, though whether or not Orange deigns to pass it on to me is a bit phase-of-the-moon-ish. So, yeah, probably best to email.    Reminds me - I'd better flag the notification as Unread so I don't forget.    And back to Jeffrey:    Don't sweat it. This blog clearly shows that I'm an idiot. ;-)

Add a comment (v0.11) [help?] . . . try the comment feed!
		Your name
		Your email	(optional)
		Validation	Are you real? Please type 85530 backwards.
		Your comment