- entry 2023/10/20

Today's blog entry is a long one. It was raining and "surprise! no new release of my sequencer". ☺

Amazon lies

Part of the purchasing decision was that both articles said "Delivery tomorrow (if you order within X hours and Y minutes)". So I put the two into my virtual basket, headed to the checkout, paid...

...and saw the guaranteed date of delivery was Monday.

I spoke to a customer service person who was quite apologetic and said that the site wasn't up to date.

Really? The automated behaviour of one of the most advanced on-line purchasing systems in the world "isn't up to date"? Sorry, consider me incredulous.

Amazon delivery

Now, Amazon isn't going to suddenly and magically change how their delivery system works, so essentially at a time when inflation is high, wages are depressed (as as the workers), and people's purchasing power has been diminished...
...the government has just handed Amazon three euros of pure profit on every book order...
...under the excuse of supporting small booksellers.

You couldn't make this up, could you?

Thankfully, for Prime subscribers, postage remains quick and free for any order that doesn't contain books.

Oh, and before anybody comments on Amazon being the evil empire etc, it is actually a boon for those of us living out in the sticks (especially us introverts that tend to want to avoid crowded places like cities). I pick stuff on a website, and two or three days later it turns up.
Maybe one should look at Amazon's successes in online ordering as an indictment of everybody else's failures?

Just a shame Bezos is a bit of a twat and their anti-worker anti-union stance in America (the land of barely existing labour laws) is infamous.
But, then, which filthy rich techlord isn't a wanker? Case in point, just look at the former-glory blue bird that used to allow crappy journos to fill articles without doing any actual work...

Total Eclipse of the Heart

Taking on this song, perhaps, wasn't the greatest idea. It's hard to metalise something like that - it was written by Jim Steinman for god's sake, the guy who wrote MeatLoaf's material, which is about as metal as non-metal gets (and indeed created a new genre all its own that is often called "Wagnerian Rock" due to the dramatic intensity that would often be so over the top that it would cross the line multiple times).
Couple that with Bonnie Tyler's vocals and, yeah... Sorry Exit Eden but as somebody who grew up in the 80s and remembers the original well, I don't think anybody's vocals have come close.

How well do I know that song? Hmm... about this well. ☺

As joyously analogue as analogue can get.

Oh, Epic is now playing "The Furthest Shore" by While Heaven Wept. Nice slow tempo guitar solo at the end there. Sometimes real power doesn't need to hit you at a couple of hundred beats per minute. This ending, it's just laid back majesty.

Edit: Lots later - Xandria trying to pull off "I Would Do Anything For Love (But I Won't Do That)" (which is gender flipped with a female lead, actually it sounds like several). Not a bad effort from Xandria, but so far from the original, it just shows how damn effortless MeatLoaf made his performances.

Shonky VGA cable

When I set up this Pi 2 in the living room with an old 1280×1024 flat panel monitor that I had out in the shed, I needed to pinch that video cable to hook the Pi's HDMI adaptor to the monitor.

So I thought I'd get myself a cheap cable from Amazon to replace the one on the PC. It didn't need to be great quality as I rarely use the PC these days. So I picked a cable that cost €3,89 and was delivered the following day...

A cheap VGA cable.

I fitted it to the PC and turned the PC on. It was running XP, that has an annoying tendency to try to intelligently detect and adapt to the installed hardware which is great when setting up a system but not so great if a glitch or other problem makes a piece of hardware fail to be correctly recognised.
As in the case with my monitor. The new VGA cable clearly doesn't have wires for the monitor ID as the computer decided to set up a new monitor and give it 800×600 resolution. Now, this is XP so it's possible to change screen resolutions on the fly. Only, out of the long list of resolutions, my monitor's 1440×900 wasn't there, and an hour of fiddling later it seems the only way to get it back would be to put the original VGA lead back and get the PC to detect the monitor.
Which it did flawlessly the first time.

So, okay. I'll just use it with the Pi. After all, the Pi is essentially hardwired (in settings) to output 1280×1024 regardless of what RISC OS is doing. So, no big right?

Wrong. Big. Huge.

Oh, my, this is awful.

See all that smearing? It's known as "VGA ghosting" and it's often because of unshielded cables and the signals interfering with each other, especially at higher resolutions.

Compare:

Back when analogue VGA was conceived, 640×480 and 800×600 (SVGA) were common. My Pi is literally outputting a million pixels more than standard VGA. As the speeds increase and the timings decrease, deficiencies in the cables will start to show up.

Clearly this cable is no use.

So let's look inside.

The barest minimum to make a functional video cable.

There you have it. It's the least possible to make a video cable that actually works. A single flimsy ground wire, two wires for the horizontal and vertical sync, and three wires for the red, green, and blue. No IIC wires which explains why my PC couldn't ID the monitor.
Also worthy of note is that the nice looking ferrite bead is literally just a bit of moulded plastic stuck to the cable. I feel like Big Clive right now.

Now, the thing is, if this cable is crap and introduces signal degradation, well, what happens if I simply join the two plugs together? I only need to take the signal from the HDMI adaptor to the back of the monitor, which is just a few centimetres.

Using the Lidl advertising leaflet to protect the table, time to fire up the soldering iron and breathe in the noxious fumes as I splice the wires together. My eyes are not up to this sort of detailed work any more. ☹

Let's fix this.

Then I carefully wrapped pieces of black electrical tape around each join, and then a length of the tape around everything.
This was then connected between the HDMI adaptor and the monitor.

High speed cable my arse.

It works. No more ghosting. The display is... about as sharp as you'll be getting from analogue video. Unfortunately none of my monitors have DVI or HDMI inputs, so while the PC outputs proper analogue signals, everything else outputs digital video which is converted to analogue for travelling down a piece of wire, which - as the monitor is an LCD panel - is then translated back into digital form for controlling the LCD matrix.

Still, I now have a video cable for the living room Pi and the PC. ☺

Lidl burger fail

Lidl burger fail.

This mess is what happens when one does weird things like putting a burger into a plastic pouch instead of a little carton like, well, everybody else. There was nothing to hold the burger together in the bag and, well, you can see the result.
The instructions suggested cooking it at two minutes and forty seconds at 600W. I gave it 2m30s at 800W and it was cold in the middle, so I gave it another 2m30s at 80% (so as not to incinerate the lid).

Despite the woeful presentation and the ingredients that don't bear thinking about, it didn't taste bad.

Lidl Samhain nuggets

Lidl spooky nuggets.

The first thing that I did was to give the ghosts eyes. What kind of ghost doesn't have eyes?

Ghosts need eyes.

I then violently removed the bottom half of the ghost. Photo included, complete with bean juice blood, for a level of horror potential appropriate for the season.

Ghosts scream silently.

God's been busy

God raining chaos unto thee.

I like how Dall-E2 has made God look like an Arab. At least it payed attention to where The Holy Land actually is, which is more than one can say for the door-to-door mob that seem to liken Jesus to some sort of rugged Chuck Norris clone.

Citizen PA10 printer module teardown

PA10 printer module.

The printer in my printing calculator is a Citizen PA10 module. There's no information on the Internet. Let's change that. ☺
Time for a deep dive.

Let's dive into this.

Wiring

Connection wires.

The wires, left to right, with VCC at 6.40V, are:

Sensing position

Here is the toothed wheel.

Position sense cog (printer is upside down).

You can see that there are thirteen small cogs and one large cog. If we ground the yellow wire to activate the motor, we obtain the following waveform.

Position sense waveform.

If each square represents 5 milliseconds, then it looks as if it takes about 53ms per revolution. Which implies that the heads are spinning at about 18.8 revolutions per second, or about 1,100 rpm. Not bad for a calculator!

If a full revolution takes 53ms and there are fifteen positions (the big tooth counts for two), then this implies that it takes roughly 3.5ms per cog. Here's a close-up of the waveform (note that it's decidedly analogue) showing this to be the case.

Position sense waveform in detail.

Because of the pull-up, the longer cog makes a rather messy waveform.

Position sense - the bigger cog.

The motor

Activating the motor by hand.

The solenoid

If we press the C/CE key, the calculator will print "0· C" followed by two linefeeds according to the following waveform.

Solenoid waveform for "0· C".

The secret to understanding how this works is to realise that the printer must print something for every movement of the print head. As the print head rotates, a little plastic nobble inside pushes the rubber wheel forward to press against the paper, and it then snaps back which advances the print head one position to the left. The exact timing of when this happens determines which character on the print wheel is pressed against the paper. But there's more to this. There are three wheels, two black and one red. All of the symbols are on the first wheel, then the numbers along with ·,-# are on the next two wheels - the middle one being black and the final one being red.

In the waveform above, the first pulse will press 'C' to the paper. The next two pulses will happen when the wheel is at an empty place (so it prints nothing). Then we must change to the middle wheel for the '·' and finally on the same wheel we output '0', and the two linefeeds.

It appears that the pulses that happen every 100ms are for the normal printing, while the ones that happen after 60ms are for changing which position of the print head is in use. The pulses themselves last for 4ms.
The final print and the lifefeed share a much longer pulse, which looks to be 26ms. This engages a different part of the mechanism that, following the print, will throw the heads back to the home position and advance the paper.

Next we shall look at the waveform for outputting "-4·00 +".

Solenoid waveform for "-4·00 +".

Here the theory starts to come unstuck as we'd have expected to see either a longer 'short' pulse or a double pulse in order to push us over to the red, but there doesn't appear to be. I suspect there's some sort of timing issue that I'm not picking up on.

What I can say is that my plan to try controlling the printer manually is doomed to failure. It depends far too much on intricate timing so would need some sort of microcontroller. Perhaps if I had such a thing running I could fiddle around to see how it actually chooses which wheel it uses for printing, as I'm just not seeing anything stand out on the 'scope probing.

The print wheels

Wheel 1 is the first, or the rightmost as you look down into the printer.
Wheel 3 is the last, the red one, the leftmost as you look down into the printer.

⬚ means there's nothing there, it's a non-printing place.
The dash across is a place where little teeth hold the rubber wheels in place.

If you want to play around or repurpose one of these printer units, then I hope the information that I have uncovered will be of use to you.

Solitary Shell

It's not exactly like me, I don't think I'm a danger to myself... and I certainly disagree with the concept of "Monday morning lunatic", you have no idea how much tea I need on a Monday morning in order to be a barely functional human.
As for spending hours at a time writing? Well, between writing SimpleSeq and these blog entries... yeah... many hours of writing.
Considered somewhat odd? Keep to myself? Daydream in and out of my own world? Uh... check, check, checkity-check-check.

I don't feel I'm drifting in and out of sanity. I think sanity is the problem, not me. I mean, look around. Jeez.

Just know this - I'm happy in my shell. I don't need to come out. Leave me alone.

Perky melody, though. Happily upbeat.

Your comments:

Please note that while I check this page every so often, I am not able to control what users write; therefore I disclaim all liability for unpleasant and/or infringing and/or defamatory material. Undesired content will be removed as soon as it is noticed. By leaving a comment, you agree not to post material that is illegal or in bad taste, and you should be aware that the time and your IP address are both recorded, should it be necessary to find out who you are. Oh, and don't bother trying to inline HTML. I'm not that stupid! ☺ ADDING COMMENTS DOES NOT WORK IF READING TRANSLATED VERSIONS.
 
You can now follow comment additions with the comment RSS feed. This is distinct from the b.log RSS feed, so you can subscribe to one or both as you wish.

Zerosquare, 20th October 2023, 22:33

On the subject of Amazon, while I won't deny the convenience aspect, they ca

Zerosquare, 20th October 2023, 23:02

(damn, I hit Submit too soon ; you can remove the previous comment)    On the subject of Amazon, while I won't deny the convenience aspect:  - they can afford to lose money on a proportion of their business, because it's subsidized by other stuff like AWS (and Amazon was unprofitable for nearly a decade, so it relied on investors with very deep pockets)  - they're known for their abusive practices towards their suppliers, employees and delivery drivers  - they regularly use their dominant position to drive out competitors, then set their own rules  - not to mention the whole thing about paying very little taxes    So, it's less of "Amazon managed to succeed where everybody else failed", and more of "you can succeed in this business, as long as you get your actual revenue from somewhere else, and you screw everyone else".    Much like offshoring jobs to reduce costs, whether the convenience is a net benefit for society in pretty much up for debate.

Zerosquare, 20th October 2023, 23:05

On a different subject, don't you have an ESP32 board laying around? It should be more than fast enough to drive the calculator printer.

Rick, 20th October 2023, 23:34

The little tax paid isn't Amazon dodging tax, it's just them making use of lax rules regarding tax. It's our own governments that should close those loopholes...but they won't as that would unduly affect them and some of their wealthy donors.    I have an ESP32 around, but don't fancy going through the headaches of making it play nice with 6V hardware.

Anon, 21st October 2023, 10:26

Rick - it always surprises you that an uber-geek such as yourself doesn't have a monitor with HDMI or DVI input.    I picked up an old Dell monitor at a charity shop the other day for £5 - 24", 1680x1050, with VGA and DVI inputs. Works great on a Pi (amongst other things) with an HDMI to DVI cable.    For those who aren't aware, DVI and HDMI are electrically identical as far as video is concerned; HDMI just uses a smaller connector with more pins, and some extra wires that support digital audio and CEC (Consumer Electronics Control). If you've got a monitor with DVI input then a simple adaptor cable will make it work. And the improvement in picture quality is fairly substantial. I was using a similar arrangement for some months with my all-in-one PC (I know, but it had been reduced from £399 to £200, i3, 256Gb SSD, 4GB RAM and a built in 22" full HD IPS display - I stuck a spare 16GB SODIMM into it so it's now 20GB) with my old Iiyama ProLite monitor until a month or so ago when I picked up an Acer 22" IPS full HD (1920x1080) that matches the built-in one on the PC - £30 off eBay including postage.    The all-in-one only has an HDMI output (no VGA) for a second monitor. I'm surprised that monitors are still being manufactured that don't have HDMI or DVI inputs. Even my laptop only has HDMI out for an external monitor, they stopped fitting VGA some years ago.    Speaking of which, does anyone else find it annoying that modern laptops no longer have optical drives fitted, and don't even have space to install one? I did like that with my old laptop I could be round at a friend's place and rip a few of their CDs on the laptop without needing anything extra - nowadays I need to carry a USB DVD drive around in the laptop bag. Still, it does make the laptop itself slimmer I guess.

Rick, 21st October 2023, 13:09

The monitor I'm currently looking at is an iiSonic IIMJ7.  These sorts of things tend to turn up fairly cheaply in vide greniers (boot sales) precisely because you can't plug modern stuff into them.    If you could, then they'd still be used, passed on to friends/family, or listed on sites like LeBonCoin or eBay for more than I'd be willing to pay.    Ever since those sites became popular, vide greniers are more and more piles of rubbish with anything potentially good carrying inflated prices as people believe that's what they could get on LeBonCoin. It's one of the reasons I do vide greniers mostly as a recreational thing these days (which means I don't actually go to that many any more). Fewer bargains to be found.    And, yes, I noticed the lack of DVD slots on modern laptops. Which is why I never thought of getting myself one. A big use case for me would have been watching DVDs while sitting in bed. ;) Of course, mostly evaporated with Netflix...

Anon, 24th October 2023, 10:35

I don't miss the built-in optical drive that much, but sometimes it would be useful to still have it.    On the desktop PC? I had an old external SCSI case kicking around. Took the 50-way Centronics connectors out of the back panel, then having picked up a USB3 to SATA interface, I carefully threaded the USB and power cables through the Centronics-shaped holes. I then installed the Pioneer BD-R drive that I'd salvaged from my old desktop (which did have 5.25" external slots).    Ok, so the faceplate of the drive is black and the case is beige / cream, but it works perfectly. I can rip and burn CDs, DVDs and Blu-Ray discs. All using bits that I had lying around, plus a fiver for the adapter.

Add a comment (v0.11) [help?] . . . try the comment feed!
		Your name
		Your email	(optional)
		Validation	Are you real? Please type 07582 backwards.
		Your comment