mailto: blog -at- heyrick -dot- eu

Dude...

As I write this, Antenne Symphonic Rock is playing "Let's Build A Temple" by Therion.
I have the door open as it's warm outside (free warmth!).

A blackbird is sitting in the tree singing along with it.

The song has changed to "Shadowmaker" by Apocalyptica. Blackbird has gone, not interested.

So the wildlife (from a sample of one) has given a chirp of approval to Therion...

Later: It has come back to enjoy "Vienna" by the Trans Siberian Orchestra.

I can just imagine it with its wings slightly out, bobbing its head to the beat. A long time ago I had a budgie that used to do that to Meatloaf. 🤘

 

SimpleSeq v0.23

Loads of changes.

  • Numerous internal changes and bug fixes that I won't bore you by describing.
  • After loading a voice map file, you'll get some status saying how many voices were loaded and if you wish you can list them. It's a simple text list so probably not overly useful, but it's there if you want it.
    Yamaha PSR-E333 instruments
    Yamaha PSR-E333 instrument list.
  • Created a new Program setup dialogue for things that don't belong in the music; for example the dark mode setting belongs as a part of the program, not each piece of music.
    Program setup
    Program setup.
  • Playing music no longer has that status bar at the top of the screen, it's now a proper dialogue.
    Playing music
    Playing music.
  • The input channel (for entering notes in the editor and transcribing) can be selected from all channels, channel 1 only (for sane keyboards like my Yamaha), channels 1-8 only (for gonzo keyboards like my Roland), or the current channel only (for specific controllers).
    The utility of the middle two (ch1 and ch1-8) is to allow music input without inadvertently picking up on whatever percussion may be playing at the same time if you're playing to a selected drum track/style.
  • The drum channel (#10) now has a specific setup where you can directly give the Program Change and Bank Select values.
    Drum channel setup
    Drum channel setup.
    Note that you specify the Program Change value, which is usually one less than is printed in most user guide instrument/voice/tone lists.
  • Added new controller types: 91 Reverb, 92, Tremolo, 93, Chorus, 94 Detune, 95 Phaser.
    Which are supported depends upon your instrument, typically 91 (Reverb) and 93 (Chorus) are supported, refer to the MIDI implementation chart in your user guide.
  • Added Program Change as a pseudo controller. This means it is possible to hijack a channel for the special effects present on one of the extended drum channels.
    This example uses the Bank Select LSB (0) and MSB (126) and Program Change (112) shown in red in the left column to set the channel to a set of special effects voices, so the following notes actually play "Yo, Get up! Yo! Get up!". This is a more advanced setting and will require you to know the Program Change and Bank Select values for your instrument. Note that SimpleSeq will behave as if the channel default voice was in use. Technically changing voice mid-channel isn't a supported action, but if you know what you're doing then you can. ☺
    Overriding the channel voice
    Overriding the channel voice.
    Don't ask me. "Yo!", "Go!", "Get up!", "Whooow!", and various pitches of "Huuaah!" (the universal sound of constipation) are supplied within my instrument. <shrug>
  • The two-octave Pitch Bend has been removed. What it was intended to do is much better handled using the octave shift.
  • Added the ability to exchange (swap) two channels. It's called "Exchange" to justify using the keypress ^X.
  • As a last minute addition, the voice selection menu is now available in the channel setup dialogue by clicking MENU over the instrument name in the selection choice. This seems to work okay for me, so please let me know if it doesn't for you.
    You can still press ^F6 to call it up directly because, well, sometimes that's just simpler.

Oh, and I updated the user guide too. Whoo!
It's been a busy rainy day.

Here's the update for you:

Download simpleseq_023.zip (191.20K)
For RISC OS 5 machines with MIDI

 

Here is the updated, now 28 page, user guide for SimpleSeq v0.23.

 

 

Your comments:

Please note that while I check this page every so often, I am not able to control what users write; therefore I disclaim all liability for unpleasant and/or infringing and/or defamatory material. Undesired content will be removed as soon as it is noticed. By leaving a comment, you agree not to post material that is illegal or in bad taste, and you should be aware that the time and your IP address are both recorded, should it be necessary to find out who you are. Oh, and don't bother trying to inline HTML. I'm not that stupid! ☺ ADDING COMMENTS DOES NOT WORK IF READING TRANSLATED VERSIONS.
 
You can now follow comment additions with the comment RSS feed. This is distinct from the b.log RSS feed, so you can subscribe to one or both as you wish.

David Pilling, 19th February 2024, 03:43
No midi, no musical talent, but I read the user guide, work of art.
Rick, 20th February 2024, 11:31
Thank you. It was your work of art that made it possible. ;)

Add a comment (v0.11) [help?] . . . try the comment feed!
Your name
Your email (optional)
Validation Are you real? Please type 01518 backwards.
Your comment
French flagSpanish flagJapanese flag
Calendar
«   February 2024   »
MonTueWedThuFriSatSun
   123
5689
1213141516
19202123
26272829   

(Felicity? Marte? Find out!)

Last 5 entries

List all b.log entries

Return to the site index

Geekery

Search

Search Rick's b.log!

PS: Don't try to be clever.
It's a simple substring match.

Etc...

Last read at 19:39 on 2024/04/16.

QR code


Valid HTML 4.01 Transitional
Valid CSS
Valid RSS 2.0

 

© 2024 Rick Murray
This web page is licenced for your personal, private, non-commercial use only. No automated processing by advertising systems is permitted.
RIPA notice: No consent is given for interception of page transmission.

 

Have you noticed the watermarks on pictures?
Next entry - 2024/02/22
Return to top of page